Receiving Frozen Embryos From Another Clinic: A Checklist for IVF Labs

Technical Insights
Receiving frozen embryos from another clinic: a checklist for IVF labs, from paperwork to handover

Share

FacebookXLinkedInWhatsApp

A checklist for IVF labs receiving frozen embryos from another clinic: acceptance papers, storage, delivery day, handover checks and chain of custody.

When your lab is receiving frozen embryos from another clinic, most of the work happens before the courier walks in. The acceptance paperwork, the storage plan and the delivery time all need to be settled in advance, so the handover itself takes minutes and nothing is left to guesswork.

This checklist is written for embryologists, lab managers and IVF coordinators at the receiving end. It follows the transfer in order, from the first request to the moment the specimens are in your tank. Every lab has its own SOPs and regulatory framework, so use it as a starting point to compare with your own procedures, not as a replacement for them.

1. Confirm the transfer on paper before anything moves

A transfer should not be scheduled until your lab has formally agreed to accept it and the sending clinic has agreed to release it.

In practice, most clinics work with three core documents:

  • An acceptance form from your clinic, confirming you agree to receive the specimens for this patient.
  • A release form from the sending clinic, confirming the patient authorized the transfer to your facility.
  • Patient identification that lets you match the incoming specimens to the right record.

Some labs also require infectious disease screening results before they accept frozen material. If yours does, ask for them at this stage rather than on delivery day.

Consent and transfer rules vary by country and by state, and they change. When a case is unusual, for example donor material or an international transfer, check it with your clinic’s legal counsel or a reproductive attorney.

2. Make sure you can store and use what is coming

Before you accept, confirm that the incoming specimens fit your storage and your warming procedures.

Ask the sending lab for an inventory of what will travel, and review it with the embryologist who will eventually work with the specimens:

  • How many devices are coming, and what type they are.
  • What kind of material each device holds: embryos, eggs or sperm.
  • The freezing method and the details your lab needs to plan warming later.
  • Where in your storage the specimens will go, and that the space is available on the delivery day.

Settling these questions early is far easier than discovering a mismatch with the shipper already on your bench.

3. Agree on the delivery day with both labs

The delivery day should be one your lab has chosen, with a named person ready to receive the shipper.

A short call or email between the two labs and the courier company covers most of it:

  • The delivery date and the time window, within your working hours.
  • The name and direct phone number of the embryologist who will sign for the specimens.
  • Local holidays or lab closures around the planned date.
  • Who to contact on each side if the plan changes.

At LifeParcel we confirm the delivery time with the receiving clinic before the mission starts, and we plan the route so the courier arrives during your working hours. We do not travel or deliver on Saturdays, so missions are planned around that. If something changes on your side, the courier stays with the tank until your lab can accept it. Our dry shippers hold -196°C for up to 21 days, while a typical mission takes 3–4 days door to door, so there is a wide margin for a change of plan.

4. Know what arrives with the courier

With a hand-carry courier, the specimens arrive in a dry shipper that has stayed with one person since it left the sending lab.

On a LifeParcel mission, the courier arrives with:

  • A medical-grade dry shipper, prepared before pickup.
  • A data logger that has recorded the temperature 24/7 throughout the journey, along with GPS tracking.
  • The mission documents and the chain-of-custody record signed at pickup.

The shipper is never put through X-ray screening, and one dedicated courier keeps it in sight from pickup to delivery. If you want to understand what is inside the case before it reaches you, our guide on how a liquid nitrogen dry shipper works explains it step by step.

5. At the handover: what to check

The handover is the moment custody passes to your lab, so it should be checked against your records and signed.

A practical order for your team:

  1. Confirm the courier’s identity and the mission details against what you agreed.
  2. Check the documents against your acceptance paperwork and the patient record.
  3. Match the device labels and the count against the inventory you received in advance.
  4. Sign the chain-of-custody record with your name, the date and the time of receipt.
  5. Move the specimens into your storage according to your lab’s procedure.

Keep in mind what this check can and cannot show. Labels, counts and paperwork are verified at handover. The frozen specimens themselves are not examined until your lab warms them for use.

For a closer look at how custody is documented across the whole journey, see what actually happens in an IVF shipping chain of custody.

6. After delivery: close the loop

A transfer is complete only when your lab confirms that the specimens are in safe storage.

Good closing steps include:

  • Updating your storage records with the new location of each device.
  • Filing the signed chain-of-custody record with the patient’s file.
  • Requesting the temperature record from the journey if your lab wants it on file.
  • Letting the patient know the specimens have arrived, if that is your practice.

On a LifeParcel mission, the job ends when the receiving clinic confirms safe storage. Our concierge then sends the patient signed documentation confirming the arrival, and the full temperature record is available on request.

7. Staying updated while the specimens are on the way

Your lab should know where the shipper is and who to call, without having to chase anyone.

With LifeParcel, every tank is tracked by GPS and a temperature data logger 24/7, and a dedicated concierge stays in direct contact with your team throughout the mission. That means one contact for questions about arrival time, documents or anything that comes up on the day. You can see how a mission runs from start to finish on our how it works page.

The receiving lab checklist in one place

Here is the whole list for your coordinators:

  1. Acceptance form signed by your clinic.
  2. Release form received from the sending clinic.
  3. Patient identification matched to your record.
  4. Screening results received, if your lab requires them.
  5. Inventory reviewed: number and type of devices, material, freezing details.
  6. Storage space confirmed for the delivery day.
  7. Delivery date and time agreed, with a named receiving embryologist.
  8. Courier identity and documents checked at handover.
  9. Labels and count matched, chain-of-custody record signed with date and time.
  10. Specimens in storage, records updated, temperature record requested if needed.

Working with LifeParcel as the receiving clinic

LifeParcel is an embryologist-owned hand-carry courier, so our team understands what your lab is checking and why.

We coordinate the release and acceptance with both clinics on every mission, collect and prepare the required documents with your team, and plan mission dates around your lab schedule. We have 15+ years of experience and 3,200+ missions across 32+ countries on 5 continents, working with 150+ partner clinics. If you are a clinic or agency planning regular transfers, our page for clinics and agencies explains how we work with partner labs.

Frequently asked questions

What documents should the receiving clinic have before the embryos arrive?

Most clinics work with a release form from the sending clinic, their own acceptance form and patient identification. Some also require infectious disease screening results. Your courier company should help collect them before the mission is scheduled.

What if our lab is not ready when the courier arrives?

The delivery time is confirmed with your lab before the mission starts. If something changes on your side, the LifeParcel courier stays with the tank, which holds -196°C for up to 21 days, until your lab can accept it.

Can we get the temperature data from the journey?

Yes. Every LifeParcel tank has a data logger that records the temperature 24/7, and the full record is available on request. More answers are on our FAQ page.

Do you deliver on Saturdays?

No. We do not travel or deliver on Saturdays, and we plan every route so the courier arrives during the receiving clinic’s working hours.

Expecting a transfer at your lab?

Send us the route, the material and the dates you have in mind, and we will come back with a quote within 24 hours and a plan your team can check against this list. Request a quote and a member of our team will be in touch.

Follow LifeParcel on LinkedIn for fertility transport insights, mission stories and updates from our team.

Moving embryos, eggs or sperm?

Tell us your route and dates. We reply with a quote within 24 hours.

Request a quote